Brick Repointing · Richmond
Brick Repointing in Richmond
Richmond's late-Victorian terraces and riverside villas take a real beating from wind-driven rain off the Thames. Failed pointing here shows up quickly as damp patches on internal walls and eroded joints on south and west elevations.
Local property types
Brick Repointing for Richmond homes
Most Richmond homes we repoint are stock brick Victorian and Edwardian terraces around Kew Road, Sheen Road and the streets off Richmond Hill, along with red-brick mansion flats and the occasional Georgian townhouse near the Green. Each needs a different joint profile and mortar mix to look right.
We're based in Richmond and repoint houses across the borough every month - from single elevations to full house repointing on conservation-area terraces. Local scaffolders, waste carriers and access arrangements are all set up quickly because we know the streets.
Common signs
When brick repointing is needed
- Sandy, crumbling or recessed mortar joints
- Damp patches showing inside the property
- Frost damage and spalling brick faces
- Previous cement repointing on a Victorian home
- Open joints letting water into chimney stacks or parapets
The benefits
What you'll gain
- Decades of added life to your brickwork
- Stops water ingress and internal damp
- Preserves original brick faces - no grinder damage
- Mortar colour, texture and joint profile matched to the period
- Significant uplift to kerb appeal and property value
Pointing styles
Pointing styles we hand-finish in Richmond
Flush pointing
Mortar finished level with the brick face for a clean, modern look - common on contemporary brickwork and many stock brick facades.
Struck (weatherstruck) pointing
Joint angled so the top is recessed and the bottom flush - sheds water quickly, ideal for exposed elevations and traditional London terraces.
Heritage pointing
Period-correct profiles matched to the original hand of the wall - bucket-handle, tuck, or a specific historic finish on Victorian, Georgian and Edwardian homes.
Lime pointing
Soft, breathable lime mortar (NHL or hot lime) for pre-1919 and listed properties - protects soft brick and complies with conservation requirements.
Tuck pointing
Fine white lime 'ribbon' set into a coloured base mortar to imitate perfect thin joints - a specialist Georgian and early-Victorian finish we still hand-execute.
Our process
How we approach brick repointing in Richmond
Survey & sample
We assess the existing mortar, identify the right mix and prepare a small sample panel for your approval.
Rake out by hand
Failed mortar removed carefully - typically to a depth of at least twice the joint width - without damaging brick arises.
Mix & point
Fresh lime or specified mortar mixed on site, packed firmly into joints in stages, then finished to the original profile.
Cure & protect
Lime work is protected from sun, rain and frost during the slow carbonation period to ensure a strong, breathable finish.
FAQ
Brick Repointing in Richmond - your questions
Repointing itself doesn't normally require consent, but the mortar mix and joint profile must match the original. In conservation areas around Richmond Green and the Hill we always use lime-based mortars and period-appropriate finishes.
Same service, nearby areas
Brick Repointing across South West London
Ready to begin?
Need brick repointing in Richmond?
Free survey, fixed written quote, no pressure. Usually back to you within 48 hours.